BuildStore Advice on Electrical Fitting | BuildStore
T: 0345 223 4888

Build Advice


This trade should only ever be carried out by an expert. It is a specialist skill and safety is extremely important. Most suppliers will not connect the power until such time as the system is checked and certified by a qualified electrician.

Setting up the electrics 295390217

Your Electrician

The electrical trade is normally carried out on a supply and fix basis and is divided into two parts:

  • First Fix concerns the general carcassing where the wires are simply run into position down the walls and through the middle of any timber flooring to the outlets.
  • Second Fix which happens after plastering is complete, concerns the fixing of faceplates the wiring up and fixing of light fittings and the wiring and testing of the boiler in conjunction with the plumber.

Power Points and Fittings
Most self builders will want to ensure that they have sufficient power points and that the lighting is designed to give them the ambience they want in their new home.

It is easy to go over the top with electrical fittings but, it should be borne in mind that it is much easier and cheaper to put things in at the early stages than it is to add them later. When you do have a price from the contractor, get prices for extra points and switches.

Building regulations require that all power sockets must be no lower than 450mm from the floor. All light switches are required to be no higher than 1200mm from the floor. New regulations bring electrical works within the ambit of the Building Regulations and require that works to domestic premises must be carried out by a ‘competent person', defined as ‘A person registered under an electrical self certification scheme or a competent electrician capable of signing a BS7671 Electrical Installation Certificate'. This would normally preclude a DIY private individual or even a general builder or even a general builder's own right to provide the load bearing wall element of a package deal house.